Snazzie Designz

Design, And Everything Design Related

Posts Tagged ‘wood’

Handmade American Kestrel Bas Relief Carving

This is a handmade, pyrographed (wood burned) and hand carved American kestrel carved from limewood (basswood). It is bas-relief carving carved with hand chisels on the limewood which was cut to shape using a scroll saw. It has a flat back making it suitable to be mounted on a wall.

Handmade American Kestrel Pyrograph and Carving by snazzie-designz

Below you can see a work in progress picture of the kestrel, already cut out with the scroll saw and with the pyrography (wood burning) and carving started but not yet finished.

Handmade American Kestrel Pyrograph and Carving by snazzie-designz

 


 

This is a handmade Coptic bound notebook with an ancient map of Greenland and Frisland burned into the cover. I wanted to give it a distressed look as if it was a very old map that had been used over hundreds of years.

Handmade Greenland Coptic Bound Notebook by Snazzie Designz

The map is inspired by the ancient map of Greenland and Frislandia by Vincenzo Coronelli (1650 – 1717).

Interestingly the map contains the island o fFrisland which has been described by some as a “phantom island” since it is no longer there, and hasn’t been for thousands of years. Frisland appears on a number of maps from the 1600s -1700s even though the island had been fully submerged by that stage. It is thought that map makers such as Coronelli and Mercantor used older maps as references when adding in uncharted areas to their maps which then leads to the question who drew the earlier maps and how did they know that Frislandia was there?

 


 

More Coptic Bound Books…

This is a handmade Coptic bound notebook with a map of the Faroe Islands burned into the cover. I wanted to give this a more vibrant look as if the map had been made in the 1600s, but looked brand new.

Handmade Faroe Islands Coptic Bound Notebook by Snazzie Designz

The cover image is actually a compilation of three separate maps; Faroe map by Lucas Debes (1673), Carta marina et descriptio septentrionalium terrarium by Olaus Magnus (1539), and a more modern map of the islands found on wiki commons for a more accurate outline of the islands themselves.

In other words this is a modern map done in an ancient style, with sea creatures from the Faroe Isands area of the Mercantor map included, and long s place names.

The burning process on the curved sea creature outlines was a slow process because the wood burning tip is going with the grain and then across the grain and then with the grain again and it takes a subtle pressure control on the tip to not bunr deeper as it goes with the grain than across it making uneven lines.

Handmade Faroe Islands Coptic Bound Notebook by Snazzie Designz

Handmade Faroe Islands Coptic Bound Notebook by Snazzie Designz

 


 

More Coptic Bound Books…

Pine Grosbeak Holiday card Project 2018 by snazzie designz

Every year DeviantArt run a holiday card project where they get people from all around the world to make handmade cards which they then distribute over the holiday period to people hospital to brighten their spirits when they can’t be at home for the holidays.

Since it first started in 2004, the project has received nearly 28,000 cards sent in by thousands of deviants from over 60 different countries/political regions. This is my contribution for this year. #HolidayCardProject2018 #HolidayCardProject.

The card is made from card-backed sapele and maple wood with the pine grosbeak and tree branches pyrographed (burned into the wood). I added tints of colour to the bird, berries and snow.

The inside of the card is paper lined and I did up a printout design with a seasonal best wishes message on it.

Click here For more information about the project on DeviantArt

The pine grosbeak cover image which inspired this card was taken by gigi50 on dA.

Re-Fillable Wooden covered A4 journal with Tarot themed cover designed, handmade and pyrogrphed (wood burned) by snazzie Designz.

The paper used is high quality smoke lorenzo paper but you can add in lined paper, printed pages or any other type of pages you like.

Handmade Refillable A4 Tarot Journal by Snazzie Designz

Handmade Refillable A4 Tarot Journal by Snazzie Designz

To add or remove pages from the book you unscrew the binding posts and then add or remove punched A4 pages and replace the screw binding posts.

Handmade Refillable A4 Tarot Journal by Snazzie Designz

The front cover has a maple veneer inlay with a purfling surround, and the cover edges also have a purfling edges.

Handmade Refillable A4 Tarot Journal by Snazzie Designz

 

To see more re-fillable wooden covered A4 books/journals click here.

Handmade Yin-Yang Box

This is a wedding ring box of my own design inspired by the ancient Yin Yang symbol representing perfect harmonious balance between male and female, and it was handmade by me from start to finish.

Handmade Yin-Yang Box work In Progress

The main part of the box is made of solid oak.

The Yin wood was an off-cut piece of Ipé wood which is rock solid and almost impossible to cut or drill. It took a lot of very slow and patient cutting on my scroll saw to cut it out.

The Yang wood is pine and was much easier to work with, but I was not careful about placing the design on the wood the first time around and the grain of the wood was cutting across the very narrow tail end of the shape. It snapped off when I went to sand it. So I had to re-make the Yang piece this time I placed the shape over the wood so that the grain curves around the tail end of the piece (as circled above) making it nice and strong.

Bear Carving Final - Pyrography Colour and Varnish Complete

A bear carved (about an inch deep in parts) into Canadian wood, and then shaded and outlined with pyrography (wood burning). Colour was then added to give the water and background a bit of variation. The bear shading is all done through pyrography (wood burning), but I added a very thin wood stain to tint it a slightly more reddish in colour to make it more realistic.

I’ve included work in progress photos of how the piece was done from start to finish below.

Blank Canadian Wood Before Carving

Blank Canadian Wood Before Carving

Bear carving - Beginning of the pyrographed outlines

Bear carving – Beginning of the pyrographed outlines.

Bear Carving - Pyrography outlines complete and waterfall carved

Bear Carving – Pyrography outlines complete and waterfall carved.

Bear Carving - Pyrograhphed (wood burned) outlines and shading

Bear Carving – Pyrographed (wood burned) outlines and shading of the bear.

Carving and pyrography completed

Carving and pyrography completed, except for the background mountains which I added in at the end.

Bear Carving - Carving pyrography and colour complete

Carving pyrography (wood burning) and colour complete, but not yet varnished.

Bear Carving Final - Pyrography Colour and Varnish Complete

Bear Carving Final – Pyrography Colour and Varnish Complete

 

 

Save

Handmade Frame and Fan decorated with a Japanese Ukiyo-e Birds in the Plum Tree pattern

Hand made frame and fan pyrograph by snazzie designz

This beautiful handmade walnut and American oak frame and Baltic Pine fan were made by by Harry Wells.

Handmade walnut and American oak frame by Aldwarke

I had the very great pleasure of decorating the fan with a Japanese ukiyo-e inspired pyrograph (wood burning). The specific ukiyo-e is the Toshi Yoshida woodblock print “Spring”. “Hakubai ni Mau” translates as “Flying around the Plum Tree”.

I experimented on both sides of the fan. On the second side I experimented with distorting the outlines to match the fan folds to give it a more 3D look. I’m not sure if it succeeded entirely but was an interesting challenge nonetheless.

Handmade Framed Fan Pyrograph both side by snazzie designz

 

To see more of Harry’s remarkable craft work check out his gallery on deviantArt here.

 

WellSnazzie Collaborations Logo by snazzie-designz

For a full list of all of the WellSnazzie Collaborations please click here.

This is a handmade framed pyrograph (wood burning) of “The Lady of Shallott” based on the Alfred Lord Tennyson Poem (1842 Version Part IV).

The Lady of Shalott  Handmade Frame and Pyrograph Animated by snazzie designz

This stunning handmade frame is made by Aldwarke. Loosely inspired by Kit Williams pieces, Aldwarke took an idea and created something truly spectacular with it. The combination of American oak and meranti are such a complimentary pairing, and show off the Baltic pine background beautifully. Baltic pine is ideal for wood burning also, so that makes my job so much easier. The frame was made so seamlessly that the Baltic pine background sloted in snugly. This had great significance when it came to the woodburning, as any slippage would have resulted in misalignment and disaster. Details that people often overlook in such things are the finish and the surface. The frame arrived clean, and sanded so smoothly that it looked polished. Working with this type of piece makes my part so much easier.

Starting with a stunning frame hand made by :iconaldwarke: aldwarke my initial thoughts were Wow! It’s beautiful… please don’t let me mess it up! My second thought was that I needed to turn it upside down!

The Lady of Shalott  Handmade Frame and Pyrograph  by snazzie designz

The Lady of Shalott  Handmade Frame and Pyrograph Inside Panel by snazzie designz

The inside backing piece on it’s own. Made of Baltic pine it was a lovely surface to burn, and Adwarke’s precision in sizing it meant that it fitted snugly into the frame with no slipping, allowing me to align this with the extension of the picture onto the frame itself.

As soon as I saw the curve I knew I wanted to make that curved edge represent the edge of the boat, and have her hair and robes flow over the edge as described in the poem. How to achieve that was a new challenge. Meranti wood is a beautiful rich colour for the frame, but it would be too dark to represent the white robes described in the poem. I decided to give marquetry a go for the first time.

It was not an easy decision for me to try it, even after a reasonably successful test piece. I took it down and put it back on the shelf again for several months thinking about it. Even after months, I couldn’t see the frame in any other way than as part of the boat though, so in the end I just had to hope for the best, and to be very grateful for Aldwarke’s understanding and blind faith in me!

The Lady of Shalott Handmade Frame and Pyrograph Test Pieces by snazzie designz

The scrollwork, the lady’s gown and hair on the frame were all done with marquetry. I penciled onto maple veneer, burned, shaded and then cut out each piece individually. This was a tricky business with veneer having a tendency to split. I used masking tape on one side to reduce the likelihood of splitting.

Once cut out, I had to size and position the veneers very precisely on the frame. Unlike usual marquetry where the outside design is also veneer, I didn’t want to hide Aldwarke’s beautiful frame, so I had to carve directly into the frame itself, knowing that any slip ups were not going to be able to be undone, and the frame would be destroyed. Once in place, I traced around the cut out veneers, and then chiselled out a hole the exact size into which the veneer would slot. For the most part I got it right in the end I think. I just did the robes and hair freehand as they had to align precisely with the inner picture, and with the horizontal pieces.

I wasn’t sure what option I would go for for the boat’s prow so I did a few different ones to try them out. I opted for the swan design in the end, as I thought it was more reflective of the Lady of Shallot. The boat on the inner picture had to line up precisely with the frame or the whole thing would be a mess. Thankfully Aldwarke’s absolute precision came to the fore here, and his excellent skills meant that the backing fitted so snugly that it didn’t move at all. Such skill is to be envied.

The Lady of Shalott  Handmade Frame and Pyrograph  by snazzie designz

The Lady of Shalott  Handmade Frame and Pyrograph Bottom by snazzie designz

The Lady of Shalott  Handmade Frame and Pyrograph Vert-WM by snazzie-designz by snazzie designz

WellSnazzie Collaborations Logo by snazzie-designz

For a full list of all of the WellSnazzie Collaborations please click here.

The Covenant Pyrograph/Carving Top by snazzie-designz

Harry Wells (Aldwarke) and I have collaborated on a number of projects now and usually my talented collaborator makes marvelous wooden pieces (frames, boxes etc) and I have the great joy of decorating them with pyrography (wood burning).

This collaboration was slightly different. What many people may not realise is that not only is Aldwarke a master craftsman, but is also a beautiful writer and has an anthology of delightful and insightful stories and poems. It was within this literary treasure trove that I discovered “The Covenant”. This story was so inspirational to me, that I knew straight away that this was the perfect story to decorate this magical piece of wood.

Do yourself a favour and read this beautiful story in full Aldwarke’s Anthology blog and you too will understand how fitting the story and the wood are to each other.

The Covenant Pyrograph and Carving by snazzie-designz

 

The Covenant Pyrograph and Carving Zoom 01 by snazzie designz

The Covenant Pyrograph and Carving Zoom 03 by snazzie designz

 

It all began with a magical slice of pine wood, from a fallen pine tree in the sacred site of Monasterboice, Ireland. The wooden slice measures 1.6 x 0.5 metres (5’3” x 1’7”). After 2 years of looking at it sitting in my kitchen waiting for just the right piece of inspiration to do justice to this very special slice of wood, it finally hit me.

There were a number of new challenges for me on this project. This immense slice of wood is by far the biggest single piece of wood I’ve ever worked with, and I didn’t have a workbench big enough to accommodate it, so I had to make a temporary stand of sorts for it.

The Covenant Pyrograph and Carving Blank Wood by snazzie designz

It took a HUGE amount of work to sand it all down level and smooth on both sides using an angle grinder first, then a belt sander and then hand sanding to finish.

My sander just wasn’t up to scratch for this, and would have taken about 2 weeks to sand it properly, so I rented a belt sander. The guy in the shop said “It’ll do a jig on ya” and I learned pretty quickly what he meant by that! However, the belt sander was fantastic, and the entire surface was smoothed to a satin surface within 2 hours.

There was a substantial crack on the front, which I had to fill in and match the changing colour of the wood, which I hopefully achieved. It looks a lot less obvious now than it did anyway. There was mould on the back which I had to clean up, and eliminate before reinforcing the back and strengthening the waney edges so that they didn’t chip. Thanks to Aldwarke for letting me know that the bark edges are actually called waney edges. He almost makes me sound like I know what I’m talking about!

The Covenant Pyrograph/Carving Work In progress by snazzie-designz

This was also my very first attempt at carving a bas relief, and also my first attempt at a combination of carving and pyrography. I learned quite a few things along the way.

The Covenant Pyrograph/Carving Work In Progress by snazzie-designz

Lesson No.1: Chisels are very, very sharp so keep both hands on them at all times unless you want razor cuts on your finger tips. I found that the habit of brushing away the carving dust was what caused the most injuries, when I’d accidentally catch the edge of the chisel. I also ended up making myself finger knuckle protectors from cotton wool and masking tape to prevent my knuckles catching sharp edges on the wood.

Lesson No.2: Carve and sand FIRST and then burn the design afterwards otherwise you end up having to re-burn everything.

The Covenant Pyrograph/Carving Text Work In Progress by snazzie-designz

The entire story was painstakingly burned into the wood.

Burning the text took over a week. With smaller pieces you can easily rotate the piece as you burn to get the right angle with the burning tip, but with such a big piece I had to move around it.

 

The Covenant Pyro - Luis the Rowan Tree Guardian by snazzie-designz

The trees were hand carved to give them texture and depth giving a subtle 3D effect which the photos just don’t capture sufficiently. I couldn’t stop running my hands across the surface. The carving is only subtle because this piece was intended to be a bench that would sit at the end of a garden by a rowan tree fitting in completely with the story.

The Covenant Pyrograph/Carving Zoom 05 by snazzie-designz

The artwork is all my own original design inspired by the story (though the couple were inspired by some royalty free clip art). The sun is on one side, and the moon on the other, and the leaves of the rowan tree range from autumnal oranges and yellows to summer and spring greens to try and encapsulate the timelessness of the story.

 

The Covenant Pyrograph/Carving Text Zoom by snazzie-designz

The text “shoot” has a little shoot of a rowan tree growing out of it.

 

The Covenant Pyrograph/Carving Apple Tree Spirit by snazzie-designz

I especially like that the apple tree spirit was not purposefully drawn in by me, but appeared of his own accord. 

 

The Covenant Pyrograph/Carving Zoom 02 by snazzie-designz

The Song of Wandering Aengus Triptych

Triptych Panel 03  The Golden Apples by snazzie-designz

The couple in the tree is an homage to our previous Triptych collaboration which you can read about here.

The Covenant Pyrograph/Carving Ogham by snazzie-designz

The symbols on the top left are the ogham symbols of the four trees (the hazel, rowan and apple trees in the story, and the pine tree of the wood itself) to honour the spirit of the trees.

The Covenant Pyrograph/Carving by snazzie-designz

The line “You must address yourself to the material in a loving frame of mind.” especially struck a chord with me, and shows the wisdom of a master craftsman coming through in the writing.  All crafts people appreciate the spirit of the materials with which they are working, and it is in the spirit of addressing oneself to the material in a loving frame of mind that this piece was carved, and pyrographed .

Originally the quote “You must address yourself to the material in a loving frame of mind.” Was text only, but I found that it was too plain looking, so I added some scrollwork to balance it out a bit.

The Covenant Pyrograph/Carving Zoom 04 by snazzie-designz

The Covenant Pyrograph/Carving by snazzie-designz

I hope that this carving/pyrograph has done justice to Aldwarke’s truly beautiful story. I hope that it will become a physical manifestation of the protective spirit of Luis that can be passed down as the “great wheel” continues to turn, so
that the timeless joy of “The Covenant” can be enjoyed for generations to come.

 

WellSnazzie Collaborations Logo by snazzie-designz

For a full list of all of the WellSnazzie Collaborations please click here.

Save